M.2 NGFF to PCI-E X16 Slot Transfer Card Mining m.2 Riser with sata 6pin 4pin molex Riser card raiser
* Using Four Solid Capacitors,Power Supply More Stable and Safe.
* SATA/4Pin/6Pin Three Power Supply Interface, Graphics Card Could Independent From Motherboard.
* High Quality Slot, Graphics Card Connect Better.
* Multi-Layer Shielded Wire, Connected to 3m not Attenuate the Signal.
* 60cm USB 3.0 Cable is Soft and Stable, Easy to Track, Graphics Card Could be Placed.
* With a Fixed Buckle, More Convenient to Remove Graphics and Fixed Graphics,Will not Fall off From the Slot.
* Use the Most Stable Wire to Ensure the Integrity of Signal.
* Don’t Compare Ours Wiht The Market’s Poor USB Cable, No Woven Shielded Network And Unstable.
* Power Cable Use Pure Copper Wire, To Avoid Burning When Mining, Support Inspection, Leave a Compensable Ten.
* Used For the motherboard M2 NGFF KEY-M Slot, Please Insert the Floppy Drive Power Cable When Using it.
* Integrated SATA, Big 4pin and 6pin ports , more compatibility. Using 60cm USB 3.0 cable as extender cable, premium quality and super speed.
* Computer Must Power Off When Insert and Pull of This PCI-E Cable.
* Please Sure the Direction is Correct When Install.
* Hold the Equipment to Avoide Broken the Pins.
1 x PCI-E 16X Board Adapter
1 x NGFF/M.2 Riser Card
1 x USB3.0 Cable
- Please check pictures for more details.